Specifying with array()

An array can be created using the array() language construct. It takes any number of comma-separated key => value pairs as arguments.

array(
    key  => value,
    key2 => value2,
    key3 => value3,
    ...
)

The comma after the last array element is optional and can be omitted. This is usually done for single-line arrays, i.e. array(1, 2) is preferred over array(1, 2, ). For multi-line arrays on the other hand the trailing comma is commonly used, as it allows easier addition of new elements at the end.

As of PHP 5.4 you can also use the short array syntax, which replaces array() with [].

The key can either be an integer or a string. The value can be of any type.

Additionally the following key casts will occur:

• Strings containing valid decimal integers, unless the number is preceded by a + sign, will be cast to the integer type. E.g. the key "8" will actually be stored under 8. On the other hand "08" will not be cast, as it isn't a valid decimal integer.
• Floats are also cast to integers, which means that the fractional part will be truncated. E.g. the key 8.7 will actually be stored under 8.
• Bools are cast to integers, too, i.e. the key true will actually be stored under 1 and the key false under 0.
• Null will be cast to the empty string, i.e. the key null will actually be stored under "".
• Arrays and objects can not be used as keys. Doing so will result in a warning: Illegal offset type.

If multiple elements in the array declaration use the same key, only the last one will be used as all others are overwritten.

array(1) {
  [1]=>
  string(1) "d"
}

PHP arrays can contain integer and string keys at the same time as PHP does not distinguish between indexed and associative arrays.

array(4) {
  ["foo"]=>
  string(3) "bar"
  ["bar"]=>
  string(3) "foo"
  [100]=>
  int(-100)
  [-100]=>
  int(100)
}

The key is optional. If it is not specified, PHP will use the increment of the largest previously used integer key.

array(4) {
  [0]=>
  string(3) "foo"
  [1]=>
  string(3) "bar"
  [2]=>
  string(5) "hello"
  [3]=>
  string(5) "world"
}

It is possible to specify the key only for some elements and leave it out for others:

array(4) {
  [0]=>
  string(1) "a"
  [1]=>
  string(1) "b"
  [6]=>
  string(1) "c"
  [7]=>
  string(1) "d"
}

Accessing array elements with square bracket syntax

Array elements can be accessed using the array[key] syntax.

string(3) "bar"
int(24)
string(3) "foo"

Note:

Both square brackets and curly braces can be used interchangeably for accessing array elements (e.g. $array[42] and $array{42} will both do the same thing in the example above).

As of PHP 5.4 it is possible to array dereference the result of a function or method call directly. Before it was only possible using a temporary variable.

As of PHP 5.5 it is possible to array dereference an array literal.

Note:

Attempting to access an array key which has not been defined is the same as accessing any other undefined variable: an E_NOTICE-level error message will be issued, and the result will be NULL.

Note:

Array dereferencing a scalar value which is not a string silently yields NULL, i.e. without issuing an error message.

Creating/modifying with square bracket syntax

An existing array can be modified by explicitly setting values in it.

This is done by assigning values to the array, specifying the key in brackets. The key can also be omitted, resulting in an empty pair of brackets ([]).

$arr[key] = value;
$arr[] = value;
// key may be an integer or string
// value may be any value of any type

If $arr doesn't exist yet, it will be created, so this is also an alternative way to create an array. This practice is however discouraged because if $arr already contains some value (e.g. string from request variable) then this value will stay in the place and [] may actually stand for string access operator. It is always better to initialize a variable by a direct assignment.

Note: As of PHP 7.1.0, applying the empty index operator on a string throws a fatal error. Formerly, the string was silently converted to an array.

To change a certain value, assign a new value to that element using its key. To remove a key/value pair, call the unset() function on it.

Note:

As mentioned above, if no key is specified, the maximum of the existing integer indices is taken, and the new key will be that maximum value plus 1 (but at least 0). If no integer indices exist yet, the key will be 0 (zero).

Note that the maximum integer key used for this need not currently exist in the array. It need only have existed in the array at some time since the last time the array was re-indexed. The following example illustrates:

<?php
// Create a simple array.
$array = array(1, 2, 3, 4, 5);
print_r($array);

// Now delete every item, but leave the array itself intact:
foreach ($array as $i => $value) {
    unset($array[$i]);
}
print_r($array);

// Append an item (note that the new key is 5, instead of 0).
$array[] = 6;
print_r($array);

// Re-index:
$array = array_values($array);
$array[] = 7;
print_r($array);
?>

The above example will output:

Array
(
    [0] => 1
    [1] => 2
    [2] => 3
    [3] => 4
    [4] => 5
)
Array
(
)
Array
(
    [5] => 6
)
Array
(
    [0] => 6
    [1] => 7
)

Why is $foo[bar] wrong?

Always use quotes around a string literal array index. For example, $foo['bar'] is correct, while $foo[bar] is not. But why? It is common to encounter this kind of syntax in old scripts:

This is wrong, but it works. The reason is that this code has an undefined constant (bar) rather than a string ('bar' - notice the quotes). It works because PHP automatically converts a bare string (an unquoted string which does not correspond to any known symbol) into a string which contains the bare string. For instance, if there is no defined constant named bar, then PHP will substitute in the string 'bar' and use that.

Note: This does not mean to always quote the key. Do not quote keys which are constants or variables, as this will prevent PHP from interpreting them.

<?php
error_reporting(E_ALL);
ini_set('display_errors', true);
ini_set('html_errors', false);
// Simple array:
$array = array(1, 2);
$count = count($array);
for ($i = 0; $i < $count; $i++) {
    echo "\nChecking $i: \n";
    echo "Bad: " . $array['$i'] . "\n";
    echo "Good: " . $array[$i] . "\n";
    echo "Bad: {$array['$i']}\n";
    echo "Good: {$array[$i]}\n";
}
?>

The above example will output:

Checking 0: 
Notice: Undefined index:  $i in /path/to/script.html on line 9
Bad: 
Good: 1
Notice: Undefined index:  $i in /path/to/script.html on line 11
Bad: 
Good: 1

Checking 1: 
Notice: Undefined index:  $i in /path/to/script.html on line 9
Bad: 
Good: 2
Notice: Undefined index:  $i in /path/to/script.html on line 11
Bad: 
Good: 2

More examples to demonstrate this behaviour:

When error_reporting is set to show E_NOTICE level errors (by setting it to E_ALL, for example), such uses will become immediately visible. By default, error_reporting is set not to show notices.

As stated in the syntax section, what's inside the square brackets ('[' and ']') must be an expression. This means that code like this works:

This is an example of using a function return value as the array index. PHP also knows about constants:

Note that E_ERROR is also a valid identifier, just like bar in the first example. But the last example is in fact the same as writing:

because E_ERROR equals 1, etc.